Welder Mma Arc

SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER

SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER
SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER
SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER
SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER
SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER
SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER
SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER
SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER

SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER

INDUSTRIAL JET TIG AC / DC II 250 IGBT PFC + cooler. Welder Fantasy JET TIG II Inverters are microprocessor-based welding sources based on IGBT technology, designed for welding carbon steel, stainless steel, acid resistant, copper, brass, magnesium, titanium, and all aluminum alloys. Possibility to save 9 full programs. Gas flow before and after welding. Pulsating current - ARC FORCE (MMA).

Knob adjust (coarse and fine adjustment). LCD display of individual program.

MMA DC - MMA VRD DC +. ARGUMENTATION BY LIFT-ARC (2T and 4T). CRYSTALLIZING HF (2T and 4T).

CLOTHING PEDAL (2T & 4T). World-class welding handle TIG SGT18 4m. Technical details of the handle. DC load capacity: [A] 380. Electrode diameter: [mm] 1.0-4.0.

Min flow of coolant: [l / min] 1.0. Min power radiator: [W] 900. Welder WF JET TIG II AC / DC 250 IGBT. TIG handle SGT18 4 mb.

Supply voltage 1 230V 50 Hz. Power Consumption TIG / MMA 7,5kVA. Dimensions 430 200 290 mm. TIG DC welding current range 3-250 A. TIG welding current AC AC 5-250 A.

TIG efficiency 60% 250 A. Waveform shape rectangular, trapezoidal, triangular, sinusoidal. Frequency adjustment of the current 20-250 Hz.

AC current balance 5% -90%. Initial / final gas AC / DC mode 0-25 / 0-50 s. Starting / ending current DC mode 5-200 / 3-200 A.

Start / stop AC 5-200 A. Rise / Fall time AC / DC mode 0-25s. AC / DC Pulse Base 3-100%. AC / DC pulse duration 5% -95%.

Mixed AC Advanced 0.1-10 Hz. Pulsating current Standard DC 0.1-500 Hz.

Frequency of pulsating current Standard AC Soft Square, Triangular, Sine 0,1-10 Hz. TIG HF (ionizer) / LIFT arc function.

MMA / VRD MMA 70 / 21V. Welding current range MMA DC + / DC-20-160A. MMA performance 60% 200 A.

HOT START TIME 0-2 s. Small dimensions and low weight.

Easy to use control panel. Possibility to save full 9 programs. HF - the device is equipped with an ionizer that allows you to contact the welding arc. PRE and POST GAS - gas flow before and after welding. UP and DOWN SLOPE - rise and fall of welding current.

AC EASY SETUP - the basic output parameters of the device are programmed with the following values: frequency 120Hz; balance 25%; gas discharge time before bow arc 0.5s; gas outflow time after arc expiration 4s; starting current 50%; terminal current 50%, rise time 1s; fall time 3s. DC EASY SETUP - the basic parameters of the device are stored in the device memory with the following values: gas discharge time before arc 0.5s; gas outflow time after expiration of arc 3s; starting current 50%; terminal current 50%, rise time 1s; fall time 3s. STANDARD AC / DC - The pulsed current function is used mainly for welding thin parts (even 0.1mm thick), low melting point metals such as lead, or welding in forced positions. Other advantages of pulsed welding are the lower heat transfer zone, greater welding arc stability, greater milling depth and improved appearance of the weld face.

ADVANCED AC - mixed current welding AC DC. In a single cycle, there is a transition between the AC and the negative DC (-). This cycle is repeated throughout the welding process.

Mixed current welding is especially useful when joining different thicknesses. Also, the noise emission compared to AC welding is reduced. HOT START - power-up function for welding arc welding to facilitate welding. ARC FORCE - a function that stabilizes the welding process by keeping the welding arc voltage independent of its length and facilitating control of the amount of spatter. AC / DC EASY SETUP - POSSIBILITY OF USING THE PREFERRED FABRIC SETTINGS FOR ALUMINUM AND STEEL WELDING. NORMAL SETUP - WELDING SETTINGS SETTING MANUFACTURING BY INDIVIDUAL NEEDS. POSSIBILITY TO CHOOSE THE FALL SHAPE.

Welding cooler 1.7 kW. Cooling power 1.7 kW. Pump capacity 8 l / min.

Dimensions 352 271 493 mm. The appliance is equipped with 230V 32A industrial plug. The item "SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER" is in sale since Friday, October 13, 2017. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders".

The seller is "www_weldes_de" and is located in Siemianowice Slaskie. This item can be shipped worldwide.
  • EAN: 5906150873660
  • Unit Quantity: 1
  • MPN: JET TIG II 200
  • Unit Type: Unit
  • Brand: Welder Fantasy
  • Bundle Listing: Yes

SET Industrial JET TIG II AC / DC 250 with PFC ARC MMA WIG Welder Fantasy COOLER