250AMP MIG/MAG/FLUX/LIFT TIG/MMA DC INVERTER WELDER. 5 IN 1 DC IGBT WELDING MACHINE.
If you order and pay before 2:00pm we dispatch your item in same day. Multi-process welder which can be very easily operated so it is very good for the person without welding experience. When you just select the wire.
Diameter size in MIG/MAG welding then it automatically gives. To match the wire size you selected so you don't need to adjust anything. However you can also do a fine-tuning of the voltage and inductance to get the best welding quality for your purpose so this welder is a perfect equipment for. Garage, farm, mobile technicians, DIY and other repair services.
MIG/MAG/FLUX & LIFT TIG & MMA/ARC/STICK. DC Inverter welder 5 IN 1. DIGI Synergic System control: the. Current, voltage and feeding speed can be.
Get matching each other so very easy to use. Digital Control Panel Design enables more accurate and easier operating. Variable Voltage Control - Gives precise adjustment of output voltage to give control of heat input. Variable Inductance Control - Gives arc transfer adjustment to improve weld quality and significantly reduce spatter. Over current protection, over heat protection and over load protection.
2T and 4T are available on MIG mode. Reverse Polarity Facility (gasless welding) - Allows use of self shielding flux cored wires for outdoor applications. Wire diameter size can be set on 0.6/0.8/1.0(mm) and comes with a wire feed roller 0.8/1.0mm already fitted on the welder.
Wire reel size can be up to 5kg. Soft start - When MIG welding wire only feeds slowly until the welding arc has been established. Speedy Feeding Wire Button - to assist with loading wire.Comes with a quality 3m. MIG torch and 3m valved lift TIG torch. TIG arc start method: Lift Please note the TIG function is lift arc start, not High Frequency ignition. AUTO ARC FORCE, HOT START and No stick technology.
Usable electrodes on MMA mode: 1.6 - 4.0mm. IGBT technology inverter - more efficient and easier to use than a transformer. Compact portable design and light weight. Provides very smooth low splatter welds on all steels due to its inverter technology.Fitted with a 16 amp industrial plug. This machine is not suitable for welding aluminium and aluminium alloys. MIG TIG(LIFT ARC) MMA.
9.5 9 10.8. Rated Duty Cycle (25C °). 496 x 212 x 380. Specification of Lift TIG Torch. Model: WP-17V Valved TIG Torch. Gas hose copper nut size. Gas control: Turn on/off the valve on the torch neck. Suitable for Lift ARC start TIG welding (not suitable for HF ARC start TIG welding). 3 x Ceramic Cups 4/5/6. 3 x Collets 1.6/2.0/2.4mm.1 x Collet Body 2.4mm. 1 x Long Back Cap.
1 x Short Back Cap. Specification of Argon Gas Regulator. Applicable Gas: Argon gas or Argon/Co2 mix gas. Output Pressure: 0.25MPa+/-0.05MPa 2.5+/-0.5kgf/. Output Flowing rate: 025 L/min.
Please carefully check this regulator photo and specification to make sure it can fit your gas bottle cylinder before taking your order as. Not this regulator can fit all types of gas bottle cylinders and also this regulator is suitable for Argon or Argon/Co2 mix gas but not suitable for pure Co2 gas. ANDELI MIG-250 DC inverter Welder, 3m MIG Torch, 3m valved lift TIG torch, 2m Earth Lead, 2m MMA Lead, Gas Regulator, Instruction manual, Wire Brush, Welding face mask.
LOOKING FOR OTHER SIZE OR DIFFERENT TYPE OF INVERTER WELDER. Bank Transfer, Personal Cheque and Postal Order (UK Buyers ONLY). P&P cost is received and cleared.
In the majority of cases goods are dispatched within 24 hours (Mon-Fri). Buyers are responsible for paying the custom duty if located outside UK.
We try to answer all the emails within 24 hours after receiving.