Hyundai MIG Gas Welder Inverter 200Amps MMA ARC Welding Portable Complete Set

Hyundai HYMIG-200 200Amp MIG/MMA(ARC) Inverter Welder, 230V Single Phase. Variable DC output of 50Amp to 190Amp.

Electrode size 1mm to 3.2mm. MIG welder with MMA/ARC function - Latest IGBT Technology (Insulate Gate Bipolar Transistor).

The HYMIG-200 is a lightweight and incredibly versatile single phase MIG/MMA welder from Hyundai. The HYMIG-200 is capable of welding mild steel up to 6mm. Weighing only 10.0kg, the HYMIG-200 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer, face mask and wire brush making the HYMIG-200 extremely cost effective. The HYMIG-200 MIG welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials.

The welding (output) current of the HYMIG-200 can be regulated within the range of 20-190 Ampere making the HYMIG-200 adjustable to suit welding different materials and thicknesses of steel. Beware of lower quality models by always checking the Duty Cycle. Duty cycle is the amount of time, within a 10 minute period the welder can be used, on a given output. For example, our 200A welder has a duty cycle of 20% when used on 190A output (MIG), and 35% when used on 160A output (MMA/ARC). This means it can be used for three and a half minutes consistently, but then, it must be rested for the remaining six and half minutes.

Cheaper, lower quality welders claim to be a certain Amperage output, but can have a very low duty cycle on the output they have claimed. The inverter technology used within the Hyundai welders has certain advantages compared to more traditional transformer welders. The inverter type welders are usually lighter, more cost effective and usually require less input power for a comparable output. Fitted with thermal overload protection to ensure maximum durability.

Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys. Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMIG-200 is a good all rounder for welding with applicable wire size of 0.8mm Flux or 1.0mm Solid Core.

The HYMIG-200 features high frequency starts allowing for smooth arc strikes. With low service and maintenance requirements, the HYMIG-200 is incredibly easy to use and maintain, and has full Hyundai UK parts back up. IN THE BOX: MIG torch with 3m cable, Electrode holder with 2m cable, Earth clamp with 1.5m cable, Chipping hammer, Face mask/shield & Wire brush.

Know your welder: (MMA) Manual Metal Arc - Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally known as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld. (TIG) Tungsten Inert Gas - Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. (MIG) Metal Inert Gas - Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join. Duty Cycle (%) Under 40ºC. 0.8-1.0 (MIG) 1.0-4.0 (MMA).

Dimensions (H x W x L) (mm). 540 X 320 X 405. Genpower Ltd is the UK distributor for Hyundai Power Equipment. We have been working with Hyundai, South Korea for 10 years. The power products division is one of the fastest growing segments of the Hyundai operation and it is driven by the same values that makes Hyundai cars such a success- Value, Innovation, Performance and Durability.

We are offering the full range of Hyundai machines direct to the consumer, to ensure you receive the best products at the lowest prices. No middlemen adding to the cost. We have a large and experienced team at our UK headquarters available to support your product if you require advice on servicing or spare parts. THE HYUNDAI PROMISE: VALUE - INNOVATION - PERFORMANCE - DURABILITY. The item "Hyundai MIG Gas Welder Inverter 200Amps MMA ARC Welding Portable Complete Set" is in sale since Friday, May 4, 2018.

This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Multiprocess Welders & Cutters". The seller is "hyundaipowerequipmentdirect" and is located in Pembroke Dock.

This item can be shipped to United Kingdom.

Current @ 60%: 125 MIG / 120MMA
No Load Voltage: 65.00V
Frequency: 50.00Hz
Duty Cycle (Up To 40C): 35% @ 180A MIG / 35% @ 140A MMA
Dimensions (LXWXH): 540 x 320 x 405mm (L x W x H)
Custom Bundle: No
Unit Quantity: 1
Net Weight: 10.00Kg
Input Voltage: 230V
Duty Cycle: 100% @ 105A (MIG) 35% @ 140A (MMA)
Warranty: 2 Years
Gross Weight: 15.0Kg
Rated Output Current MIG: 50A - 190A
Rated Output Current MMA: 20A - 160A
Colour: Blue
Chipping Hammer: Included
Earth Clamp: Included
Electrode Holder: Included
Efficiency: 85.00%
Brand: Hyundai
Welding Wire Spool Size: 5Kg
Power Factor: 0.73
Welded Material: Steel
Features: Gasless
Item Type: MIG Welder
MPN: HYMIG180