Welder Mma Arc

Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop

Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop

Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop
Compactor / Wacker Plates Part. Pressure Washer Lances & Guns. Air Compressor Electric 200L Ltr Litre Belt Drive 3hp 145psi 10bar 14cfm. Diesel Generator ELECTRIC START 5.2kw 6.5kVA Standby Backup & Service Kits. Electric Garden Grass Strimmer Edger Trimmer 250W 10m Power Cable HYUNDAI. Pressure Washer Telescopic Lance Aluminium High Pressure 18' Foot Quick Release. Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop.

Uses a standard household 13amp 3 pin UK plug. Ideal for home garage use. Can be used with 3.2mm and 2.5mm welding rods. Lightweight and compact welder with higher efficiency. Easy to start arc little spatter and good formation.

The HYMMA-120 is a lightweight and incredibly versatile single phase ARC/MMA welder from Hyundai that can be powered by a standard UK 3-pin 13amp plug. Weighing only 4.5kg, the HYMMA-120 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable and wire brush making the HYMMA-120 extremely cost effective. The HYMMA-120 ARC welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials.

The welding (output) current of the HYMMA-120 can be regulated within the range of 10-120 Ampere making the HYMMA-120 adjustable to suit welding different materials and thicknesses of steel. Fitted with a LCD digital display the HYMMA-120 features auto hot start and anti stick technology. The inverter technology used within the Hyundai welders has certain advantages compared to more traditional transformer welders. The inverter type welders are usually lighter, more cost effective and usually require less input power for a comparable output. Fitted with thermal overload protection to ensure maximum durability.

Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys. Suitable for farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMMA-120 is a good all rounder for welding with rods of 2.5mm and up to 3.2mm. The HYMMA-120 features high frequency starts allowing for smooth arc strikes. With low service and maintenance requirements, the HYMMA-120 is incredibly easy to use and maintain, and has full Hyundai UK parts back up.

In the box: Electrode holder with 2m cable, Earth clamp with 1.5m cable & Wire brush. Know your welder: (MMA) Manual Metal Arc - Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally known as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.

(TIG) Tungsten Inert Gas - Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. (MIG) Metal Inert Gas - Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join. Hyundai HYMMA-160 160Amp MMA/ARC Inverter Welder, 230V Single Phase. Variable DC output of 20Amp to 160Amp. Electrode size 1mm to 4mm.

Duty cycle of 95A / 100% / 10minutes, 160A / 35% / 3.5minutes. Fitted with thermal overload protection, Anti-stick and hot start functions. Includes welding rod holder, earth clamp and cables.

Suitable for mechanics, mobile technicians, farmers and DIY enthusiasts. Full UK service and parts operation to maintain your welder for years to come. The HYMMA-160 is a lightweight and incredibly versatile single phase ARC/MMA welder from Hyundai. Weighing only 6.0kg, the HYMMA-120 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer and wire brush making the HYMMA-160 extremely cost effective.

The HYMMA-160 ARC welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMMA-160 can be regulated within the range of 10-160 Ampere making the HYMMA-160 adjustable to suit welding different materials and thicknesses of steel. Beware of lower quality models by always checking the'Duty Cycle'.

Duty cycle is the amount of time, within a 10 minute period the welder can be used, on a given output. For example, our 160A welder has a duty cycle of 25% when used on 160A output. This means it can be used for three and a half minutes in every 10 minute period. Duty cycles for the Hyundai welder range shown below. Output Amperage / Duty Cycle / Period of use within 10 minute period.

70A / 100% / 10minutes. 90A / 50% / 6minutes. 120A / 35% / 3.5minutes. 95A / 100% / 10minutes.

120A / 50% / 6minutes. 160A / 25% / 3.5minutes.

155A / 100% / 10minutes. 200A / 60% / 6minutes. 105A / 100% / 10minutes. 140A / 60% / 6minutes.

180A / 35% / 3.5minutes. Cheaper, lower quality welders claim to be a certain Amperage output, but can have a very low duty cycle on the output they have claimed. Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMMA-160 is a good all rounder for welding with rods up to 4mm. The HYMMA-160 features high frequency starts allowing for smooth arc strikes. With low service and maintenance requirements, the HYMMA-160 is incredibly easy to use and maintain, and has full Hyundai UK parts back up.

In the box: Electrode holder with 2m cable, Earth clamp with 1.5m cable, Chipping hammer & Wire brush. (MMA) Manual Metal Arc - Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.

Duty Cycle (%) Under 40ºC. Dimensions (H x W x L) (mm). 360 X 250 X 310.

Hyundai HYTIG-200 200 Amp 230v Single Phase TIG / MMA / ARC Inverter Welder. 200 amps maximum Tig welding power. 160 amps maximums MMA/ARC welding power. Variable DC output of 10 to 200 amps. Anti-stick and hot start functions.

Latest MOSFET Technology (Metal Oxide Semiconductor Field Effect Transistor). Supplied with electrode holder, tig torch, earth clamp, cables, welding mask, wire brush and chipping hammer. Full UK service and parts operation. The Hyundai HYTIG-200 is a highly portable TIG MMA ARC welder suitable for many fabrication and maintenance welding jobs. Capable of welding multiple metals, and the ability to run from inverters or generators, this manual metal arc welder is a versatile all-rounder great for mechanics, farmers, mobile technicians and the domestic user.

The HYTIG-200 arc welder features a stepless regulator for variable control of the welding current. This allows you to adjust the output current from 10 to 200 amps if using Tig, or 10 to 160 amps if using MMA/ARC, making the inverter welder capable of welding steel, stainless steel, copper, nickel, titanium and their alloys. The HYMMA-200 also has a low current facility for effective welding of thinner materials. With a 60% duty cycle at 200 amps when using TIG or 160 amps when using MMA? Duty cycles for the Hyundai welder range.

160A / 35% / 3.5minutes. The HYMMA-200 benefits from a built in hot start feature, which produces ideal boost to the output voltage to ease electronic arc ignition and an anti-stick device, which will switch off the welding power source if the welding electrode sticks to the material being welded. This prevents overloading the unit and easy removal of the electrode. Built in thermal overload protection prevents dangerous overheating and ensures maximum durability.

The lightweight 12Kg welder is housed in a powder coated pressed steel case to help prevent damage from knocks and bangs and offers increased corrosion resistance. The adjustable carrying harness makes transporting the welder simple and easy. Hyundai HYMMA 200 Inverter Welder, Tig torch with 4m cable, 2 Spare Tig Collets, Tig Torch Long Back Cap, Electrode Welding Rod Holder with 2m Cable, Earth Clamp with 1.5m Cable, Chipping Hammer, Wire Brush, User Manual. 460 X 270 X 345.

Hyundai HYMIG-200 200Amp MIG/MMA(ARC) Inverter Welder, 230V Single Phase. Variable DC output of 50Amp to 1190Amp.

Electrode size 1mm to 3.2mm. MIG welder with MMA/ARC function - Latest IGBT Technology (Insulate Gate Bipolar Transistor). The HYMIG-200 is a lightweight and incredibly versatile single phase MIG/MMA welder from Hyundai.

The HYMIG-200 is capable of welding mild steel up to 6mm. Weighing only kg, the HYMIG-200 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance.

Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer, face mask and wire brush making the HYMIG-200 extremely cost effective. The HYMIG-200 MIG welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMIG-200 can be regulated within the range of 10-180 Ampere making the HYMIG-200 adjustable to suit welding different materials and thicknesses of steel.

For example, our 200A welder has a duty cycle of 35% when used on 190A output (MIG), and 35% when used on 160A output (MMA/ARC). This means it can be used for three and a half minutes consistently, but then, it must be'rested' for the remaining six and half minutes. Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMIG-200 is a good all rounder for welding with applicable wire size of 0.8mm Flux or 1.0mm Solid Core.

The HYMIG-200 features high frequency starts allowing for smooth arc strikes. With low service and maintenance requirements, the HYMIG-200 is incredibly easy to use and maintain, and has full Hyundai UK parts back up. IN THE BOX: MIG torch with 3m cable, Electrode holder with 2m cable, Earth clamp with 1.5m cable, Chipping hammer & Wire brush.

0.8-10 (MIG) 1.0-4.0 (MMA). 540 X 320 X 405.

Hyundai HYMIG-200I 200 Amp MIG Welder, 230V Single Phase, Pro series. IGBT (Insulated Gate Bipolar Transistor) Technology and high duty cycle - Easy to operate, fast wire feeding speed - Automatic compensation function for input voltage fluctuation - Can weld carbon steel and alloy steel - Suitable for auto mechanics, mobile technicians, farmers and DIY enthusiasts - IGBT (Insulated Gate Bipolar Transistor) Technology and high duty cycle. The HYMIG-200I is a heavy duty and incredibly versatile single phase MIG/MMA welder from Hyundai. The HYMIG-200I is capable of welding mild steel from 0.8mm to 8mm.

Weighing only 48kg, the HYMIG-200I is easy to transport thanks to its mounted handles on the heavy duty steel case with powder coated finish for extra corrosion resistance and trolley wheels with Gas bottle holder at rear. Accessories include MIG welding torch with 3m cable, earth clamp with 2.5m cable and brush. The HYMIG-200I MIG welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMIG-200I can be regulated within the range of 50-200 Ampere making the HYMIG-200I adjustable to suit welding different materials and thicknesses of steel.

For example, this 200A welder has a duty cycle of 60% when used on 200A output (MIG). This means it can be used for six minutes in any ten minute period. Suitable for fabricators, farmers, home mechanics, auto and mobile technicians and DIY enthusiasts the HYMIG-200I is a good all rounder for welding with applicable wire size of 0.8mm Flux or 1.0mm Solid Core. The HYMIG-200I features high frequency starts allowing for smooth arc strikes.

With low service and maintenance requirements, the HYMIG-200I is incredibly easy to use and maintain, and has full Hyundai UK parts back up. IN THE BOX: MIG welding torch with 3m cable, earth clamp with 2.5m cable and brush. DIMENSIONS (L X W X H). Hyundai HYMIG-350GDL MIG DC Inverter Welder, 400V Three Phase, Pro Series. IGBT (Insulated Gate Bipolar Transistor) Technology and high duty cycle.

Three welding methods: MIG / MAG, Lift TIG & MMA. Provides SYNERGY mode help to set welding parameters based on users' choice of material type and thickness and welding wire diameter. Able to use single or double pulse current in MIG or MAG mode. Precise control knobs for current, voltage, wire feed speed and inductance.

Portable and increased mobility thanks to four wheels and space for a full size gas cylinder. VRD, 2T/4T function, 4 drive feeder.

Ideal for automotive industry, steel fabricators, construction, welding of aluminum alloys, stainless steel and other materials. The HYMIG-350GDL is a heavy duty and incredibly versatile 4 roller wire feed welder from Hyundai designed for the professional user. This powerful combination welder is ideal for a multitude of welding situations allowing you to MMA, TIG & MIG weld and proves itself with its universal applications and high-quality welds with a low error rate. Weighing 42.2kg, the HYMIG-350GDL 3 phase welder is easy to transport thanks to its mounted handles on the heavy duty steel case with powder coated finish for extra corrosion resistance and trolley wheels with full size gas bottle holder at rear. Accessories include MIG Euro welding torch with 3m cable, earth clamp with 2.5m cable.

Featuring a LCD display that allows you to choose between MIG, TIG & MMA settings this professional welder has an automatic, or Synergy functionality where you can select the basic welding parameters such as the type of material, thickness of material to be welded and the diameter of the welding wire and the machine will set the output current, and wire speed to match. This is ideal for new welders as it removes the trial and error which normally comes with setting up each different welding job. With a duty cycle of 60 percent, the welding current has a maximum power of 250A. If you turn the power down to 200A, then you can weld without interruption. The clearly arranged control panel with LED display gives you maximum control over the required welding parameters and is also easy to use while wearing welding gloves.

You can freely adjust the amperage and the voltage (MIG), specify the inductance or choose the welding process you require. For example, A 200A welder has a duty cycle of 60% when used on 200A output (MIG). Featuring a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials.

The welding (output) current of the HYMIG-350GDL can be regulated within the range of 40-350 Ampere making the HYMIG-350GDL adjustable to suit welding different materials and thicknesses of steel. Cheaper, lower quality welders claim to be a certain amperage output, but can have a very low duty cycle on the output they have claimed. The HYMIG-350GDL is a professional inverter welder perfect for welding with applicable wire sizes of 0.8, 1.0 and 1.2mm. The HYMIG-350GDL features high frequency starts allowing for smooth arc strikes. With low service and maintenance requirements, the HYMIG-350GDL is incredibly easy to use and maintain, and has full HYUNDAI UK parts back up.

Welder, MIG Welding Torch with 3m Cable, Earth Clamp with 2.5m Cable, Gas Regulator, MIG Tips & Spanner, Spare Torch Liner, Wire Driving Wheels, Hose Clamps & User Manual. 3Phase AC 400V - 50Hz. MIG/MAG - 40350 Lift TIG - 10300 MMA - 30300.

810mm X 510mm X 800mm. What's in the box? HYMIG-350GDL Welder, MIG Welding Torch with 3m Cable, Earth Clamp with 2.5m Cable. Gas Regulator, MIG Tips & Spanner, Spare Torch Liner, Wire Driving Wheels, Hose Clamps & User Manual.

0.8 / 1.0 / 1.2. Rated Output Current & Voltage. MIG/MAG - 1631.5 Lift TIG - 10.422 MMA - 21.232. Hyundai HYMMA201 200 Amp MMA/ARC Inverter Welder. Great value mma / arc welder. Integral single PCB structure IGBT Inverter technology. Thermal overload protection and anti-stick protection. Lightweight and compact arc / mma welder with high efficiency. Easy to start arc, little spatter and good formation.

Hot ARC start, anti-stick and built in ARC force. The is a lightweight and incredibly versatile single phase MMA / ARC welder from Hyundai. Weighing only 4.5kg, the HYMMA-201 is easy to carry thanks to its adjustable harness and lightweight pressed steel case.

Feature packed ARC / MMA welder with accessories. The welder is finished in a wth powder coated case for extra corrosion resistance and comes bundled with accessories including electrode holder with 2m cable, earth clamp with 1.5m cable and wire brush making the HYMMA-201 extremely good value package. The HYMMA-201 ARC welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMMA-201 can be regulated within the range of 10-200 Ampere making the HYMMA-201 adjustable to suit welding different materials and thicknesses of steel, using rods from 2.4mm to 4.0mm. Fitted with a LCD digital display the HYMMA-200 MMA / ARC features auto hot start and anti stick technology.

The inverter welder technology used within Hyundai welders has certain advantages when compared to more traditional transformer welders. Inverter welders are lighter, more cost effective and usually require less input power for a comparable output.

Suitable for farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMMA-201 is a good all rounder for welding with rods up to 4mm. The HYMMA-201 features high frequency starts allowing for smooth arc strikes.

With low service and maintenance requirements, the Hyundai HYMMA-201 ARC / MMA Inverter Welder is incredibly easy to use and maintain, and has full Hyundai UK parts back up. HYMMA-201 ARC / MMA welder, electrode holder with 2m cable, Earth clamp with 1.5m cable & Wire brush. Electrode Holder With 2m Cable, Earth Clamp With 1.5m Cable & Brush. Hyundai HYCUT-40I 240V CUT Plasma Cutter.

The HYCUT-40I is a lightweight and incredibly versatile single phase plasma cutter from Hyundai providing a fast cut at all times. Weighing only 11kg, the HYCUT-40I is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include cutting torch with 4m cable, earth clamp with 2.5m cable, air pressure gauge, mask and brush. The HYCUT-40I CUT plasma cutter features a stepless regulator for variable control of the cutting current with a low current facility for effective cutting of thinner materials, giving instant cutting when trigger is activated, even on painted surfaces. The inverter technology used within the Hyundai plasma cutters has certain advantages compared to more traditional transformer plasma cutters.

The inverter type cutters are usually lighter, more cost effective and usually require less input power for a comparable output. Suitable for cutting through mild / stainless steel, aluminium, brass and copper. Suitable for auto body repairs fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYCUT-40I is a good all round plasma cutter for material up to 12mm. With low service and maintenance requirements, the HYCUT-40I is incredibly easy to use and maintain, and has full Hyundai UK parts back up. In the box: Cutting torch with 4m cable, earth clamp with 2.5m cable, air pressure gauge, mask and brush.

Cutting torch with 4m cable, earth clamp with 2.5m cable, air pressure gauge, mask and brush. Pressure of Air Compressor (bar).

Hyundai HYTIG-160 160Amp TIG/MMA/ARC Inverter Welder, 230V Single Phase. Light and robust MIG / Arc / TIG Welder. Variable DC output of 10Amp to 160Amp (TIG), or 10Amp to 160Amp (MMA/ARC).

Stable and reliable welding current. A great value welder for mechanics, mobile technicians, farmers and DIY enthusiasts.

Light, portable and reliable TIG welder. The HYTIG-160 is a lightweight and incredibly versatile. Single phase MMA / TIG welder. Weighing 12kg, the HYTIG-160 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance.

Accessories include TIG welding torch with 4m cable, electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer and wire brush making the HYTIG-160 extremely cost effective. The HYTIG-160 TIG welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYTIG-160 can be regulated within the range of 20-160 Ampere making the HYTIG-160 adjustable to suit welding different materials and thicknesses of steel. For example, our 160A welder has a duty cycle of 60% when used on 160A output (TIG).

124A / 100% / 10minutes. 160A / 60% / 6minutes. TIG Welder with inverter technology and thermal overload protection.

Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYTIG-160 is a good all rounder for welding with rods up to 4mm. The HYTIG-160 features high frequency starts allowing for smooth arc strikes. With low service and maintenance requirements, the HYTIG-160 is incredibly easy to use and maintain, and has full Hyundai UK parts back up. In the box: TIG welding torch with 4m cable, Electrode holder with 2m cable, Earth clamp with 1.5m cable, Chipping hammer & Wire brush. 20160 (TIG) / 20140 (MMA). Hyundai HYWH-850RM Professional Auto Darkening Air Fed Welding Helmet. Portable, light & balanced welding helmet with adjustable headband that wears comfortable and relieves fatigue. With full head protection that covers ears, neck and both sides of the head. Suitable for MAG, TIG, MIG (HEAVY), MIG (LIGHT) PAC & PAW Welding. Features a high performance solar cell technology with rechargeable lithium-ion energy pack. Delivers filtered, breathable air up to 8 hours without interruption. Photoelectric sensor technology, liquid crystal of high quality and spectrum filter provide welders a clear view of observation and effective protection. Audible alarm notifies the user of low air flow and low battery. Optimal visibility with variable LCD filters: UV+IR Filter, LCD1, LCD2 & Glass. The HYWH-850RM is a professional air fed welding helmet from Hyundai, featuring solar auto-dimming with spectral filtering technology, photoelectric sensors and liquid crystal light control technology, the HYWH-850RM offers full head respiratory protection to the welder, the perfect welding solution for welders in the most demanding conditions where filtered air is a must for a safe and comfortable working environment. Weighing only 1.1kg and supplied within a kit bag for easy storage and transport.

The lightweight, compact design enables the user to wear comfortably for long periods of time and the soft fabric ensures a complete seal against hazardous fumes. Air supplied welding helmets use an air powered blower system that is worn by the welder around his waist which collects and filters the ambient air to a very high degree. Providing 99.8% purity the HYWH-850RM delivers fresh clean air to the welders breathing area for up to 8 hours without interruption.

The HYWH-850RM is equipped with a particle filter that protects the user against particles (solid & liquid aerosols) suited for the most difficulat working conditions. The filter contaminates air and blows it into the welding helmet hood through the flexible tube. The respirator system generates a positive air pressure to help prevent contaminants from entering the hood.

The electronic control system maintains the calibrated airflow at a pre-set level the battery powered blower units are rechargeable and depending on type normally will cover an eight hour shift. This method of protection for the welder is highly efficient and ensures welders do not breath in and ingest the many harmful particles found in weld fume. Additional protective measures may need to be in place for other workers exposed to the hazards of weld fume. The solar auto-dimming filter (ADF) applies photoelectric sensor theory which makes liquid crystal change from bright to dark state as soon as it receives arc light, while change from dark to bright state when welding is finished to protect the eyes and facial skin of users from arc light, splash and harmful radiation of IR/UV. IN THE BOX: Helmet With Darkening Lens, Hood & Headgear System, Breathing Tube, Blower Assembly With Filtration System (Spark Guard Cover, Foam Pre Filter & HEPA Filter), Belt Assembly, Battery Charger, Kit Bag & User Manual.

Infinitely Adjustable From Low To High. Up To Shade DIN 16 At All Times. 1/30000S From Light To Dark.

0.1-1.0S From Low To High. Weight (Blower Assembly, Filters, Belt, Shoulder Straps & Battery). Filter Assembly Consisting Of Foam Prefilter & HEPA Filter. Approved To Filter Particulate Down To 0.3 Micrometers In Size Filter: TH2P.

Low Speed: 5.29 CFM (150 LPM), High Speed: 6.35CFM (180 LPM). 500 Charges - Run Time Dependent On Air Flow Rate & Filter Load. Runtime Low Speed: High Speed. Solar Cell +2 Replaceable CR2450 Lithium Battery.

1.0 - 3.2. Hyundai Power Products is a brand within the trading umbrella of Genpower Ltd. We are the sole UK Importer for Hyundai Power Products, offering petrol generators from 1kw to 10kw and diesel generators from 5kw to 100kw. We also import Hyundai petrol water pumps, air compressors, construction equipment and garden machinery.

A year after starting the business in 2006, we were approached and awarded the contract to become the sole importer for Hyundai Power Products for the United Kingdom by Hyundai Corporation, Korea. Based on our knowledge and machinery sales, as well as engineering, support and maintenance expertise. Over the years our business has grown rapidly and our range of high quality, yet well priced machinery continues to grow. We pride ourselves on providing a quality product at a very competitive price, delivered promptly to your door. We have a large part holding to maintain your machinery for years to come, and expert pre-sales and after-sales advisors.

Here at Hyundai Power Products, we're working hard to ensure that all orders are unaffected by recent events whilst keeping our team as safe and well as possible. We urge our customers to follow the latest advice and to stay alert and to stay at home as much as possible. We are working closely with our couriers to ensure there is little to no delay in deliveries.

Thank you for your patience. You can contact our after-sales team who can provide you with some quick troubleshooting. Welder 200 Amp MIG Portable Inverter Gas or Gasless 230v 13 amp 3 in 1 MMA ARC. Welder 200 Amp MMA ARC Inverter Stick Rod Welding Machine HYUNDAI. Hyundai Plasma Cutter 40AMP DC inverter Cutting Machine up to 12mm / ½ steel.

Welder MIG Welding Machine 200 Amp 230V Professional Pro Series. WHAT OUR CUSTOMERS ARE SAYING ABOUT US.

Subscribe to our newsletter to get all the latest and exclusive offers. Hyundai Power Products, Pembrokeshire, SA72 4RW. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Stick Welders".

The seller is "hyundaipowerproductsdirect" and is located in this country: GB. This item can be shipped to United Kingdom.

  • MPN: HYMMA201
  • Modified Item: No
  • Custom Bundle: No
  • Welding Process: TIG
  • Polarity: DC
  • AC Frequency: 50Hz
  • Current @ 60% (A):: 90.00
  • HYMIG200I Wheels Included: Yes
  • Efficiency: Roughly 85.00%
  • No Load Voltage (V): 65.00
  • Rated Input Voltage:: 230V, 50Hz
  • Welding Rod Diameter: 3.2mm
  • Duty Cycle: 20.00%
  • Input Voltage (V): 230.00
  • Protection Class: IP21S/F
  • Secondary Colour: Black
  • Power Factor (Cosφ):: 0.70
  • Non-Domestic Product: No
  • Colour: Blue
  • Warranty: 2 Years
  • Power Factor: 0.70
  • Rated Input Power: 7.5kVA
  • Duty Cycle (%) Under 40ºC:: 35% @ 120A, 60% @ 90A, 100% @ 70A
  • Usable Electrode (mm): 1.0 - 3.2
  • Brand: Hyundai


Hyundai Welder option MIG TIG ARC MMA Plasma for Home or Garage Workshop