Welders Welding Machines ARC MIG TIG MAG MMA SPOT Gas Gasless Draper Sealey

A Quality Range of Welders from Sealey and Draper Tools. / Power Supply Connection : Please Note. As is mentioned below, some small welders are fitted with 13Amp Plugs. Others are supplied bare wired and require 16Amp Plugs (not supplied). Some Welders need to be connected to a 32Amp Supply for Maximum Power.

Voltage - 230V except SLY12 which is 415V Sealey Welders. Fan cooled DC power supply.

MIG welds steel, stainless steel, copper, nickel, titanium and their alloys. Also suitable for MMA/ARC welding with a variety of rods including rutile, basic and stainless from 1.6mm to 4mm. Can be used in gas and gasless mode.

Supplied with 3m MIG torch, 2m 16mm2 earth cable, both with 10-25 quick connectors, 3m gas hose and regulator. Welding Current: 30 - 160A.

Gas Type: CO2, Argon, CO2/Argon Mix. MIG Torch: Euro Non-Live BINZEL MB15.

MMA Accessory Kit (Optional): MMA01. To achieve maximum power a 32A supply may be required. 180A MIG/MMA Inverter Welder - IMIG180. MIG welds steel, stainless steel, copper, nickel, titanium and their alloys Also suitable for MMA/ARC welding with a variety of rods including rutile, basic and stainless from 1.6mm to 4mm. Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys.

Switch between MIG, TIG and MMA welding modes (optional extra torches required). Self-explanatory pictogram for each dial and switch.

Allows change of polarity of welding torch depending on MIG or flux-cored welding. Supplied with 3m MIG torch, 3m 16mm2 earth cable, both with 10-25 quick connectors. 3m gas hose and regulator.

Contact Tips: 0.6, 0.8 (x2), 0.9, 1mm. 0.2kg 0.8mm flux cored wire. Supplied with 3m MIG torch, 3m 16mm2 earth cable, both with 10-25 quick connectors, 3m gas hose and regulator.

TIG Accessory Kit (Optional): TIG10S. Note: Included as standard, To achieve maximum power a 32A supply may be required. MIG, TIG & MMA Inverter Welder. 3-in-1 welder - uses state-of-the-art inverter technology to achieve MIG/TIG/MMA (Arc). Inverter technology offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency. Fan Cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium, and their alloys. Also suitable for MMA (Arc) welding - a variety of rods including rutile, basic and stainless from 1.6 to ø4mm. Fully functional - LCD front panel with easy to follow set-up. First, select type of welding, you will be advised the gas mixture and polarity recommended.

Input electrode or wire thickness, completing the set-up with the material thickness, you are then ready to start welding. Up to four set-ups can be saved on the machine for fast loading. Switchable between MIG, TIG or MMA welding modes (optional torches required). Supplied with 3m MIG torch, 3m 16mm2 earth cable, both with 35-70 quick connectors, 4m gas hose and regulator.

Inverter technology - offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency. Fan Cooled - DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium, and their alloys.

Heavy-duty high output transformer and forced-air cooling to maximize duty cycle performance. Supplied with comfort grip non-live torch, 1.8m earth cable, 1m gas hose, 0.45kg flux-cored wire and 1mm contact tip.

Wire Capacity: 0.9kg Gasless & 0.7kg Mild Steel. Flux Cored Wire (0.9kg x 0.9mm): TG100/1.

Replacement Tips 1mm (Pack of 5): TG100/2. Note: For use with 0.9kg Gasless and 0.7kg Mild Steel Wire Reels only. Heavy-duty high output transformer and forced air cooling to maximize duty cycle performance.

Supplied with high quality cool running Ergo 15.2 Euro torch, 2m earth cable, 1.4m gas hose, twin gauged gas regulator and 0.6 and 0.8mm contact tips. Set-up in the gas welding mode but can also easily be switched to gasless. Can be used with large, industrial CO2 gas bottles. Supplied with a high quality BINZEL MB25 Euro torch, 3m earth cable, 1.4m of gas hose, twin gauged gas regulator, 0.8 and 1mm tips. Torch: 3m Euro Non-Live - BINZEL MB25.

Replacement Nozzle (Pack of 2): MIG929. Replacement Tips 0.8mm (Pack of 5): MIG917. Ultra-compact and lightweight unit weighing just 4kg approx. Portability allows the welder to be taken to the job at hand, ideal for mobile technicians and enthusiasts.

Unit can ARC/MMA weld a variety of rods including rutile, basic and stainless from 1.6mm up to 4mm. Features LED display, with thermal cut-out protection, anti-stick, arc force and hot start functions.

Supplied with 1.6m 16mm2 cable with electrode holder and a 1.4m 16mm2 earth clamp and cable, both with 10-25 dinse connectors. Note: To achieve maximum power a 16A supply may be required.

200A Inverter Welder & Battery Charger Starter. IGBT INVERTER TECHNOLOGY - 3-in-1 IGBT Inverter that allows the user to MMA, charge batteries and jump start vehicles with flat batteries. THREE FUNCTIONS - Functions include a 160A MMA welder, 30A battery charger and a 200A start function.

SUITABLE FOR - Unit can MMA weld a variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4mm. FEATURES INCLUDE - Featuring a LED display, with thermal cut-out protection, anti-stick, arc force and hot start functions. BATTERY TYPE - Suitable for charging VRLA (Lead Acid), GEL, AGM/EFB and Leisure Batteries on 12 and 24V systems. SUPPLIED WITH - Supplied with 1.6m 16mm² cable with electrode holder and a 1.4m 16mm² earth clamp and cable, 1m 200A charging clamps and 1.8m power cable. Tried and trusted by fabricators and professional car repair shops across the UK.

Superb quality, heavy-duty electronic wire drive motor and industrial transformer make this machine unmatched in performance and value, just check the specification. Features portable wire drive system with 2 and 4 touch on/off mechanism and 5m umbilical extension, to allow access in to high or tight areas where the welder will not fit. Supplied with 0.8mm steel wire, non-live torch and industrial Argon/CO2 regulator. Can be used with CO2, Argon or CO2/Argon mix and accepts any bottle size.

Composite casing and handle reduce heat transfer for operator comfort. Integral synchronous timer enables adjustable spot time of between 0.1 and 1.2 seconds. Fully adjustable jaw pressure from 40kg to 120kg enables close control of weld quality. Supplied with 120mm welding arms, electrodes and side handle. Supply: 230V-16A (Plug not included).

Model No SR122 Brand: Sealey Nett Weight: 10.5kg Supply: 230V Capacity: 1 + 1mm Maximum Absorbed Power: 6kW Mains Fuse: 16A Welding Current (Maximum): 3800A Duty Cycle: 1.5% Insulation Class: B Weight: 10.5kg. SPOT Welder With Digital Timer. Integral electronic control allows operator to select thickness of material while automatically calculating the optimum weld duration. Also features pulse mode for use on high stress steels commonly found in modern vehicle construction. All automatically selected parameters may be overridden by the operator if required.

Supply: 230V-25A (Plug not included). One of our SUPERMIG range, this compact no-gas welder offers excellent performance at an extremely competitive price. High output transformer and forced-air cooling to maximize duty cycle performance. Supplied with 2m non-live torch and 1.4m earth cable. Suitable for gasless operation only.

For use with flux cored wire only. Welding Current: 40 - 100A.

Wire Capacity: 1kg Gasless only. Note: To achieve maximum power a 32A supply may be required. Features heavy-duty high output transformer and forced-air cooling to ensure the highest level of performance.

Contoured grip, non-live torch ensures a steadier weld bead. Includes mini gas regulator, spool of wire, contact tips 0.6 and 0.8mm and gas cup. Suitable for welding with CO2, Argon or CO2/Argon mix. Absorbed Power: 2.8kW Case Size: Compact Weight: 20kg. Forced Air Cooling System allows high duty cycle.

Latest design chassis remains stable when used with medium size industrial gas cylinders. Professional contour grip, heat proof non-live torch ensures no sparks until you press the trigger.

Proven wire feed system for trouble-free welding. Absorbed Power: 4.1kW Case Size: Compact. Excellent continuous performance on car panel thickness material. Binzel® non-live Euro torch reduces accidental arcing and is comfortable in the hand thus ensuring a steadier weld bead. Welds stainless and aluminium too. Includes industrial gas regulator, contact tips 0.6, 0.8mm and gas cup. 3m Euro Non-Live - BINZEL® MB15.

Binzel non-live Euro torch reduces accidental arcing and is comfortable in the hand thus ensuring a steadier weld bead. Welds stainless steel and aluminium too. Includes industrial twin gauge gas regulator, contact tip 0.8mm and gas cup. Forced-Air Cooling System allows high duty cycle. Includes industrial twin gauge gas regulator, 0.8mm contact tip and gas cup.

Fan-cooled DC power supply for TIG and arc welding applications. Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance. Portability allows the welder to be taken to the job at hand making it ideal for the mobile technician. Features quick release switch on the torch for control of gas, saving on consumption. Features hot start, anti-stick, forced air cooling, thermal cut-out protection.

Suitable for arc welding using the lift start method. Optional MMA Electrode Holder: Model No.

Optional MMA Electrode Holder: MMA01. Trolley For Portable MIG Welders. Robust trolley carries portable MIG welder and gas bottle, making relocation of welding equipment quick and easy. Fitted with two fixed wheels and two castors for excellent manoeuvrability and supplied with bottle retaining chains and cable storage hooks. Upper tray for MIG welder and two lower trays for associated items.

Suitable for portable MIG welders up to 300mm wide and 480mm long including Model No's MIGHTYMIG100, MIGHTYMIG150, SUPERMIG 100, SUPERMIG130 and SUPERMIG140. Carries portable MIG welder and gas bottle, making relocation of welding equipment quick and easy. Robust trolley with two fixed wheels and two castors for excellent manoeuvrability.

Supplied with bottle retaining chains and cable storage hooks. Suitable for portable MIG welders up to 300mm wide and 480mm long, including Model No's MIGHTYMIG100, MIGHTYMIG150, SUPERMIG 100, SUPERMIG130 and SUPERMIG140. BTR4 With wheels and axle removed.

Model No BTR4 Application(s): MIGHTYMIG100, MIGHTYMIG150, SUPERMIG100, SUPERMIG130, SUPERMIG140 Brand: Sealey Maximum Welder Width/Length: 280/445mm Nett Weight: 11.20kg Note: With foot, wheels and axle removed. 200A High Frequency AC/DC TIG/MMA Aluminum Welder DTI. Dual function (TIG/MMA) high frequency ignition multi-purpose welder.

It includes powerful IGBT invertor technology. Equipped with AC/DC TIG function for welding stainless steel and aluminium. Robust machine fitted with carry bar.

250A Gas/Gasless Turbo Mig Welder. This MIG welder can be used as a gas/gasless welder and includes a Euro torch connection. It has a six-stage power setting and variable wire speed control, including a spot welding timer for precise spot welds.

Includes wheel kit and reinforced full size gas bottle support. 1 x MIG Torch (3m cable).

1 x Chipping hammer/wire brush. Power supply: 230V - 32A, 400V - 32A.

Welding wire spool size: 5-15kg. Duty cycle 230V: 10% 165A, 30% 95A, 60% 65A. Duty cycle 400V: 10% 250A, 30% 155A, 60% 100A.

Dimensions: 770 x 375 x 530mm. Euro Torch Connector/Dinse Type Coupling: 35/50. Compatible with Regular gas Bottle: YES. 220A Gas/Gasless Turbo Mig Welder. This MIG welder can be used as a gas/gasless welder and includes a Euro torch connector.

Contents: 1 x MIG Torch (3m cable), 1 x Earth clamp, 1 x Chipping hammer/wire brush, 1 x Face mask Specifications: Amperage range: 40-220A, Power supply: 230V, 400V, Plug Fitted: NO (16A PLUG REQUIRED), Welding wire spool size: 5-15kg, Duty cycle 230V: 10% 160A, 30% 90A, 60% 65A, Duty cycle 400V: 10% 220A, 30% 130A, 60% 90A, Dimensions: 770 x 375 x 530mm, Weight (net): 56kg, Euro Torch Connector/Dinse Type Coupling: 35/50, Compatible with Regular gas Bottle: YES. 180A Gas / Gasless MIG Welder. Expert 200A MIG, TIG and MMA Inverter Welder. Highly versatile multi-function 3-in-1 welder (MIG/MMA/TIG) that can be used as a gas/gasless welder. Its compact design features powerful IGBT inverter technology to create a very efficient machine that is optimised for improved productivity and ease of use. Lightweight and portable design, with carry handle. 1 x Electrode holder, 200A. 1 x Earth clamp, 300A. 1 x Contact tips, 0.8mm. 1 x Contact tips, 1.0mm. 1 x AK15 Euro MIG torch. 1 x Gas hose, 2m.

Amperage range: 30-200A (MIG), 20-200A (MMA), 20-200A (TIG). Plug Fitted: NO (32A PLUG REQUIRED).

MMA Electrode size: 1.6-5.0mm. MIG, Wire size: 0.6-1.2mm.

Flux core wire: 0.6-1.2mm. Dimensions: 420 x 205 x 300mm. Euro Torch Connector/Dinse Type Coupling: 45931.

Includes MIG & TIG Torches & Electrode Holder: YES. Gas/Gasless AC/DC MIG Aluminium Welder. Compact dual-function (MIG flux cored/MMA) gasless welder. Powerful IGBT inverter technology that is optimised for improved productivity with synergic wire feed operation.

Easy-to-use with simple and immediate one touch setting and digital display. Minimal spatter providing a perfect welding result. This compact multi-purpose gas/gasless MIG welder combines performance with ease of use. It features variable wire speed control. The thermal overload protection and internal cooling fan ensures the optimum weld. Portable, equipped with transport wheels. 1 x MIG torch (1.7m cable). 1 x Spool of solid core welding wire (1kg). Plug Fitted: NO (16A PLUG REQUIRED).

Welding wire spool size: 1kg. Dimensions: 510 x 390 x 430mm.

Tig Torch For Expert 200A 230V TIG Hf Welder. Compact dual-function (MMA/TIG) welder with powerful IGBT inverter technology.

It delivers a reliable, smooth and stable arc. The machine has a portable and compact design, built in a hard case with carry handle. This Draper Storm Force gasless MIG welder utilises flux cored wire making it suitable for welding outside. The adjustable power settings and variable wire speed control provide optimum results for a wide range of work. 1 x Roll of flux cored MIG welding wire.

Welding wire spool size: 0.45kg. Dimensions: 340 x 345 x 190mm. Plug Fitted: Yes (13A Fitted). This MMA Inverter Welder is a compact efficient machine with built-in hot start, ARC force and anti-stick.

The robust lightweight construction makes it portable, complete with carry handle. 200A MMA Inverter Welder with TIG-Lift Dti.

Compact dual-function (MMA/TIG lift) with hot start, arc force and anti-stick. This helps ensure excellent ignition and a reliable, smooth and stable arc. Portable and compact design built in a hard case with carry handle. YES, Anti-Stick: YES, Euro Torch Connector/Dinse Type Coupling: 10/25, Arc Force: YES. This ARC welder offers high performance with thermal overload protection.

It includes stepless welding control to allow fine adjustment of current. Robust lightweight construction to make it portable, complete with carry handle. Contents : 1 x Electrode holder, 200A, 1 x Earth clamp, 300A, 1 x Chipping hammer/wire brush, 1 x Face mask. Amperage range: 70-180A, Plug Fitted: NO (16A PLUG REQUIRED), Dimensions: 345 x 180 x 280mm, Weight (net): 17.5kg, Fan Cooled: YES, Thermal overload protection: YES, Stepless Current Adjustment: YES. Draper Storm Force® MMA Inverter Welder has leading functionality including hot start and anti-stick. Portable and compact design built in a hard case with shoulder strap. 1 x Earth clamp, 200A.

Dimensions: 200 x 95 x 145mm. Carry Handle for Portability: YES. This air-fed powered air-purifying respiratory (PAPR) welding helmet is ideal for keeping lungs and eyes healthy in a challenging work environment. It offers electronically controlled airflow with three levels: 150L/min, 180L/min and 220L/min. There is a dual airflow adjustment knob -- high, medium and low -- and an on/off button.

For safety, there is an alarm to warn of low airflow and low battery. The air hose is fire retardant and includes a P3 filter. This versatile helmet is auto-darkening, automatically switching on when the arc is struck and rapidly changing to the required amount of shade.

The shade coverage includes 4 and 9-13. The helmet is powered by a solar cell and a lithium-ion battery (replaceable) for fast switching and low amp sensitivity. The 98 x 48mm viewing area provides good visibility of the weld zone.

It is suitable for TIG, MIG and arc welding and also grinding. The comfortable headband is adjustable using the knob to enable an optimal fit.

Airflow rates: 150L/min, 180L/min and 220L/min. 20 Auto-Darkening Multi-Use Welding Helmet. This auto-darkening welding helmet instantly switches on when the arc is struck and rapidly changes to the required amount of shade.

The shade coverage includes 4, 5--9 and 9--13. The sensitivity is adjustable using the control panel and there is also a dark to light delay (stepless) function. The helmet is powered by a solar cell and lithium-ion battery (replaceable) for fast switching and low amp sensitivity. The 100 x 67mm viewing area provides decent visibility of the weld zone.

It is suitable for TIG, MIG and ARC welding, plasma cutting and also grinding using the dedicated setting. This auto-darkening welding helmet instantly switches on when the arc is struck and rapidly changes to 9-13 shade level.

The dark shade, sensitivity and delay time are adjustable using control knobs. The helmet is powered by a solar cell and a lithium-ion battery (replaceable). The 92.5 x 42.5mm viewing area provides good visibility of the weld zone. It is suitable for TIG, MIG and arc welding, plasma cutting and also grinding.

22 Auto-Darkening Welding Helmet - Blue Skull. As these machines are being delivered directly by Sealey or Draper there might be unfortunate rare occasions when they might be out of stock, which I would not be made aware of in advance. The chances of this happening would be very rare as both Companies keeps good levels of stock across all their ranges.

---